Stocked as sawn all sides‚ bush hammered top and front‚ all kerbs are approx 1 metre in length. Kerbs can be made to order in any size‚ with a small rounding‚ chamfer or flame-textured surface. Any other requirements made to order can normally be supplied to any specification within 8-10 weeks and often less.
These are used to reduce the amount of check on a kerb face to allow easy access points. They are made either right-handed or left-handed when viewed from the carriageway. Other uses for these kerbs is as transitions between differing kerb profiles.
|Water Absorption (%)||0.3||13755:2002||2004|
|Relative Density (kg/m³)|
|Flexural Strength (MPa)||14.7||12372:1999||2004|
|Compressive Strength (MPa)|
|Slip Resistance Wet (MPa)||75.8||14231:2003||2008|
|Slip Resistance Dry (MPa)||90.6||14231:2003||2008|
|Silicon Oxide (SiO²)|
|Aluminium Oxide (Al²O³)|
|Titanium dioxide (TiO²)|
|Iron Oxide (Fe²O³)|
|Calcium Oxide (CaO)|
|Magnesium Oxide (MgO)|
|Potassium Oxide (K²O)|
|Sodium Oxide (Na²O)|